Tig Welding Stainless Steel for Beginners

Tig Welding Stainless

TIG stands for Tungsten Inert Gas which is a welding technique done with the help of tungsten electrode for heating different metals. It is ideally preferred where the Chicago welder fails because of its limitation in doing the stainless steel soldering job.

The TIG option can be deployed for doing the stainless steel welding task. It can also perform vigorously well for the other metals such as standard steel, nickel alloys, aluminum, bronze, brass, copper, chromoly and even gold.

The first step:

The first step in such processes would always be about taking the safety precautions due to the nature of the job. You must have proper safety gear for this job. The most important requirement is to wear thick fire resistant cloth and also have a welding helmet.

While using a best TIG welder you should know that , your eyesight is in danger due to the flashing flame. As you know the safety comes first and you should be very careful in taking proper safety measures.

Always take and choose a quality welding helmet and wear high quality welding cloth to make sure you can avoid any hazards and accidents caused during the welding work.

The real welding process:

The real process of TIG welding stainless steel starts with giving connection to your TIG torch with a power source. They come with ceramic nozzle, copper sleeve for electrode holding and a mechanism for keeping it cool.

You will need to use the adaptor for plugging the torch with the power source. The adaptors are always included in your accessory package and you don’t need to buy it separately.

RELATED POST:  Lincoln Viking vs. Miller Digital: A Comparison between Two Elite Welding Helmets

Next, you will need to connect the foot pedal with the unit. It will provide you with a mechanism to control the heat produced for welding. For tougher jobs, you might need in excess, but for mild ones you must not press it too hard.

You need to select the polarity as well. The user requires playing with the settings in order to setup the unit for performing different jobs on different materials. If aluminum material is to be dealt with then you must bring the polarity at the AC setting. For TIG welding stainless steel, you got to put the polarity setting at the DC Electrode Negative setting which is also given by DCEN.

You have to make sure while grinding that you are doing it in the radial direction which is just around the circumference of the Tungsten and it shouldn’t be by the ends in any means. Use the balled tip for AC welding. On the other side for the DC purposes, it should pointed tip.

If you are required to produce a butt weld or perhaps an open corner weld then make sure that you ground the tungsten to be of around 5 to 6 mm stick. The gas for the procedure can either be pure Argon or it can be a mixture of Helium-Argon has.


The TIG welding is a sophisticated job which the beginners require to learn by investing in some time for learning. Several steps are involved in the setting up and the till the time you are done with the job. Safety precautions must be taken and the welder must ensure to wear the proper welding gear.

RELATED POST:  Tig Welding Aluminum Tips

In the whole process the most important and basic thing is to use the welder in a proper way and should be placed in a way that distributes the whole equipment in a safe manner. The gas cylinder and the working station should have proper spacing and away from each other in order to avoid flames reaching it that may result into accidents.

In addition to it the welding person should have proper knowledge for using the equipment. No matter if the person is a newbie with a proper educational background, there is still need for expert assistance in order to help the beginner work better in a safe way to avoid negative consequences and yield better results.

Useful Tips for improving Miller Plasma Cutter Performance
What to consider when buying a 110 MIG Welder